Interlogix NS3552-8P-2S-V2 - VLAN Configuration Command

Chapter 6: Command line mode
NS3552-8P-2S-V2 User Manual 341
1 1
2 0
3 0
4 0
5 0
6 0
7 0
8 0
9 0
10 0
Total Dynamic Addresses: 1
Total Static Addresses : 6
NS3552-8P-2S-V2:/>
MAC Flush
Description:
Flush all learned entries.
Syntax:
MAC Flush
VLAN Configuration Command
VLAN Configuration
Description:
Show VLAN configuration.
Syntax:
VLAN Configuration [<port_list>]
Parameters:
<port_list>: Port list or 'all',
(default: All ports)
Example:
Show VLAN status of port1
NS3552
-8P-2S-V2:/>
vlan configuration 1
VLAN Configuration:
===================
Mode : IEEE 802.1Q
Port PVID IngrFilter FrameType
LinkType Q-in-Q Mode Eth type
----
---- ---------- ---------- -------- ----------- --------
1 1 Disabled All UnTag Disable N/A
VID VLAN Name Ports
---- -------------------------------- -----