Interlogix NS3552-8P-2S-V2 - Page 344

Chapter 6: Command line mode
342 NS3552-8P-2S-V2 User Manual
1 default 1-10
VID VLAN Name Ports
----
-------------------------------- -----
VLAN forbidden table is empty
VLAV PVID
Description:
Set or show the port VLAN ID.
Syntax:
VLAN PVID [<port_list>] [<vid>|none]
Parameters:
<port_list>: Port list or 'all', default: All ports
<vid>|none : Port VLAN ID (1-4095) or 'none',
(default: Show port VLAN ID)
Default Setting:
1
Example:
Set PVID2 for port10
NS3552
-8P-2S-V2:/>
vlan pvid 10 2
VLAN Frame Type
Description:
Set or show the port VLAN frame type.
Syntax:
VLAN FrameType [<port_list>] [all|tagged]
Parameters:
<port_list>: Port list or 'all', default: All ports
all : Allow tagged and untagged frames
tagged : Allow tagged frames only
(default: Show accepted frame types)
Default Setting:
All
Example:
Set port10 that allow tagged frames only
NS3552
-8P-2S-V2:/>vlan frametype 10 tagged
VLAN Ingress Filter
Description:
Set or show the port VLAN ingress filter.
Syntax:
VLAN IngressFilter [<port_list>] [enable|disable]
Parameters:
<port_list>: Port list or 'all', default: All ports