Interlogix NS3552-8P-2S-V2 - Page 410

Chapter 6: Command line mode
408 NS3552-8P-2S-V2 User Manual
LACP Key
Description:
Set or show the LACP key.
Syntax:
LACP Key [<port_list>] [<key>]
Parameters:
<port_list>: Port list or 'all', default: All ports
<key> : LACP key (1-65535) or 'auto'
Default Setting:
auto
Example:
Set key1 for port1~4
NS3552
-8P-2S-V2:/>
lacp key 1-4 1
LACP Prio
Description:
Set or show the LACP prio.
Syntax:
LACP Prio [<port_list>] [<prio>]
Parameters:
<port_list>: Port list or 'all', default: All ports
<prio> : LACP Prio (0-65535)
Default Setting:
32768
LACP System Prio
Description:
Set or show the LACP System prio.
Syntax:
LACP System Prio [<sysprio>]
Parameters:
<sysprio>: LACP System Prio (0-65535)
Default Setting:
32768
LACP Role
Description:
Set or show the LACP role.
Syntax:
LACP Role [<port_list>] [active|passive]
Parameters:
<port_list>: Port list or 'all', default: All ports
active : Initiate LACP negotiation
passive: Listen for LACP packets
(default: Show LACP role)
Default Setting:
active