Interlogix NS3552-8P-2S-V2 User Manual

Chapter 6: Command line mode
NS3552-8P-2S-V2 User Manual 457
NS3552
-8P-2S-V2:/>
voice vlan oui lookup
Voice VLAN Port Mode
Description:
Set or show the Voice VLAN port mode.
When the port mode isn't disabled, we must disable MSTP feature before we
enable Voice VLAN. It can avoid the conflict of ingress filter.
Syntax:
Voice VLAN Port Mode [<port_list>] [disable|auto|force]
Parameters:
<port_list>: Port list or 'all', default: All ports
disable : Disjoin from Voice VLAN.
auto : Enable auto detect mode. It detects whether there is VoIP phone attached
on the specific port and configures the Voice VLAN members automatically.
force : Forced join to Voice VLAN.
(default: Show Voice VLAN port mode)
Default Setting:
disable
Example:
Set auto mode for port 1-4 of Voice VLAN port mode.
NS3552
-8P-2S-V2:/>
voice vlan port mode 1-4 auto
Voice VLAN Security
Description:
Set or show the Voice VLAN port security mode. When the function is enabled, all
non-telephone MAC address in Voice VLAN will be blocked 10 seconds.
Syntax:
Voice VLAN Security [<port_list>] [enable|disable]
Parameters:
<port_list>: Port list or 'all', default: All ports
enable : Enable Voice VLAN security mode.
disable: Disable Voice VLAN security mode
(default: Show flow Voice VLAN security mode)
Default Setting:
disable
Example:
Enable the Voice VLAN port security mode for port 1-4.
NS3552
-8P-2S-V2:/>
voice vlan security 1-4 enable
Voice VLAN Discovery Protocol
Description:
Set or show the Voice VLAN port discovery protocol mode. It only works when auto
detect mode is enabled. The LLDP feature should be enabled before configuring
discovery protocol to 'LLDP' or 'Both'. Change the discovery protocol to 'OUI' or
'LLDP' to restart the auto detect process.

Interlogix NS3552-8P-2S-V2 Specifications

General

Brand	Interlogix
Model	NS3552-8P-2S-V2
Category	Switch
Language	English