Interlogix NS3552-8P-2S-V2 User Manual

Chapter 6: Command line mode
434 NS3552-8P-2S-V2 User Manual
<pcp> : Priority Code Point (0-7)
Default Setting:
0
Example:
Set the default PCP for an untagged frame in 1 for port1
NS3552
-8P-2S-V2:/>qos Port Classification pcp 1 1
QoS Port Classification DEI
Description:
Set or show the default DEI for an untagged frame.
Syntax:
QoS Port Classification DEI [<port_list>] [<dei>]
Parameters:
<port_list>: Port list or 'all', default: All ports
<dei> : Drop Eligible Indicator (0-1)
Default Setting:
0
Example:
Set the default DEI for an untagged frame in 1 for port1.
NS3552
-8P-2S-V2:/>qos Port Classification dei 1 1
QoS Port Classification Tag
Description:
Set or show if the classification is based on the PCP and DEI values in tagged
frames.
Syntax:
QoS Port Classification Tag [<port_list>] [enable|disable]
Parameters:
<port_list>: Port list or 'all', default: All ports
enable : Enable tag classification
disable : Disable tag classification
(default: Show tag classification mode)
Default Setting:
disable
Example:
Enable QoS port classification Tag.
NS3552
-8P-2S-V2:/>
qos Port Classification tag 1-10 enable
QoS Port Classification Map
Description:
Set or show the port classification map.
This map is used when port classification tag is enabled,and the purpose is to
translate the Priority Code Point (PCP) and Drop Eligible Indicator (DEI) from a
tagged frame to QoS class and DP level.

Interlogix NS3552-8P-2S-V2 Specifications

General

Brand	Interlogix
Model	NS3552-8P-2S-V2
Category	Switch
Language	English