Interlogix NS3552-8P-2S-V2 - Page 477

Chapter 6: Command line mode
NS3552-8P-2S-V2 User Manual 475
VCL Protocol-based VLAN Add
Description:
Add VCL protocol-based VLAN group to VLAN mapping.
Syntax:
VCL ProtoVlan Vlan Add [<port_list>] <group_id> <vid>
Parameters:
<port_list>: Port list or 'all', default: All ports
<group_id> : Protocol group ID
<vid> : VLAN ID (1-4095)
VCL Protocol-based VLAN Delete
Description:
Delete VCL protocol-based VLAN group to VLAN mapping.
Syntax:
VCL ProtoVlan Vlan Delete [<port_list>] <group_id>
Parameters:
<port_list>: Port list or 'all', default: All ports
<group_id> : Protocol group ID
VCL Protocol-based VLAN Configuration
Description:
Show VCL protocol-based VLAN entries.
Syntax:
VCL ProtoVlan Conf
VCL IP Subnet-based Vlan Configuration
Description:
Show VCL IP Subnet-based VLAN configuration.
Syntax:
VCL IPVlan Configuration [<vce_id>]
Parameters:
<vce_id>: Unique VCE ID (1-128) for each VCL entry
VCL IP Subnet-based Vlan Add
Description:
Add or modify VCL IP Subnet-based VLAN entry. The maximum IPVlan entries are
limited to 128.
Syntax:
VCL IPVlan Add [<vce_id>] <ip_addr_mask> <vid> [<port_list>]
Parameters:
<vce_id> : Unique VCE ID (1-128) for each VCL entry
<ip_addr_mask>: Source IP address and mask (Format: a.b.c.d/n).
<vid> : VLAN ID (1-4095)
<port_list> : Port list or 'all', default: All ports