Chapter 4: Web configuration
NS3552-8P-2S-V2 User Manual 103
The page includes the following fields:
Object Description
Port The switch port number.
LACP Enabled Controls whether or not LACP is enabled on this switch port. LACP
will form an aggregation when two or more ports are connected to the
same partner.
Key The Key value incurred by the port, range 1-65535. Selecting Auto
(default setting) sets the key as appropriate by the physical link
speed: 10Mb = 1, 100Mb = 2, 1Gb = 3. Using the Specific setting, a
user-defined value can be entered. Ports with the same key value
can participate in the same aggregation group, while ports with
different keys cannot.
Role The Role shows the LACP activity status. The Active selection
transmits LACP packets each second, while the Passive setting
waits for a LACP packet from a partner (speak if spoken to).
Timeout The Timeout controls the period between BPDU transmissions. Fast
transmits LACP packets each second, while the Slow selection
provides a wait for 30 seconds before sending a LACP packet.
Partner Priority The Priority controls the priority of the port. If the LACP partner wants
to form a larger group than is supported by this device, then this
parameter controls which ports will be active and which ports will be
in a backup role. Lower number means greater priority.
Buttons
• Click Save to save changes.
• Click Reset to undo any changes made locally and revert to previously saved
values.
To Next Page
Loading...
