Interlogix NS3552-8P-2S-V2 - Page 173

Chapter 4: Web configuration
NS3552-8P-2S-V2 User Manual 171
Object Description
management VLAN ports.
Select the port role by clicking the Role symbol to switch the setting.
I indicates Inactive; S indicates Source; R indicates Receiver. The default
Role is Inactive.
Immediate Leave Enable the fast leave on the port.
Buttons
• Click Add New MVR VLAN to add a new MVR VLAN. Specify the VID and
configure the new entry, and then click Save.
• Click Save to save changes.
• Click Reset to undo any changes made locally and revert to previously saved
values.
MVR status
The MVR Statistics page provides MVR status.
The page includes the following fields:
Object Description
VLAN ID The multicast VLAN ID.
IGMP/MLD Queries
Received
The number of received queries for IGMP and MLD, respectively.
IGMP/MLD Queries
Transmitted
The number of transmitted queries for IGMP and MLD, respectively.
IGMPv1 Joins
Received
The number of received IGMPv1 joins.
IGMPv2/MLDv1
Reports Received
The number of received IGMPv2 joins and MLDv1 reports, respectively.
IGMPv3/MLDv2
Reports Received
The number of received IGMPv1 joins and MLDv2 reports, respectively.
IGMPv2/MLDv1
Leaves Received
The number of received IGMPv2 leaves and MLDv1 dones, respectively.
Buttons
• Click Refresh to refresh the page immediately.
• Click Clear to clear all statistics counters.