Chapter 4: Web configuration
NS3552-8P-2S-V2 User Manual 231
The page includes the following fields:
RADIUS authentication/accounting server status overview
Object Description
# The RADIUS server number. Click to navigate to detailed statistics for this
server.
IP Address The IP address and UDP port number (in <IP Address>:<UDP Port>
notation) of this server.
Status The current state of the server. This field takes one of the following values:
Disabled: The server is disabled.
Not Ready: The server is enabled, but IP communication is not yet up and
running.
Ready: The server is enabled, IP communication is up and running, and the
RADIUS module is ready to accept access or accounting attempts.
Dead (X seconds left): Access or accounting attempts were made to this
server, but it did not reply within the configured timeout. The server has
temporarily been disabled, but will get re-enabled when the dead-time
expires. The number of seconds left before this occurs is displayed in
parentheses. This state is only reachable when more than one server is
enabled.
Buttons
• Click Refresh to refresh the page immediately.
• Click Auto-refresh to refresh the page automatically. Automatic refresh occurs
every three seconds.
To Next Page
Loading...
