Chapter 4: Web configuration
NS3552-8P-2S-V2 User Manual 237
Buttons
• Select the Auto-refresh check box to refresh the page automatically. Automatic
refresh occurs every three seconds.
• Click Refresh to refresh the page immediately.
• Click Clear to clear the counters for the selected server. The "Pending Requests"
counter will not be cleared by this operation.
Windows platform RADIUS server configuration
Set up the RADIUS server and assign the client IP address to the industrial managed
switch (in this case, the field in the default IP address of the industrial managed switch
with 192.168.0.100). Ensure that the shared secret key is as same as the one you had
set at the industrial managed switch’s 802.1x system configuration (12345678 in this
case).
1. Configure the IP Address of remote RADIUS server and secret key.
2. Click New RADIUS Client on the Windows 2003 server.
To Next Page
Loading...
