Interlogix NS3552-8P-2S-V2 User Manual

Chapter 4: Web configuration
256 NS3552-8P-2S-V2 User Manual
The page includes the following fields:
Object Description
Mode of IP Source
Guard Configuration
Enable/disable the Global IP Source Guard. All configured ACEs will be lost
when the mode is enabled.
Port Mode
Configuration
Specify on which ports IP Source Guard is enabled. Only when both Global
Mode and Port Mode on a given port are enabled will IP Source Guard be
enabled on this port. All means that all ports will have one specific setting.
Max Dynamic Clients Specify the maximum number of dynamic clients that can be learned on
given ports. This value can be 0, 1, 2, and unlimited. If the port mode is
enabled and the value of max dynamic client is equal 0, it only allows the
forwarding of IP packets that are matched in static entries on the specific
port. All means that all ports will have one specific setting.
Buttons
• Click Translate Dynamic to Static to translate all dynamic entries to static entries.
• Click Save to save changes.
• Click Reset to undo any changes made locally and revert to previously saved
values.

Interlogix NS3552-8P-2S-V2 Specifications

General

Brand	Interlogix
Model	NS3552-8P-2S-V2
Category	Switch
Language	English