Interlogix NS3552-8P-2S-V2 User Manual

Chapter 2: Installation
28 NS3552-8P-2S-V2 User Manual
To remove the industrial managed switch from the track:
Carefully remove the DIN-rail from the track.
Wall mount plate mounting
Note: Follow all the wall mount plate installation steps as shown in the example.
To install the industrial managed switch on the wall:
1. Remove the DIN-rail from the industrial managed switch. Use the screwdriver to
loosen the screws to remove the DIN-rail.
2. Place the wall-mount plate on the rear panel of the industrial managed switch.

Interlogix NS3552-8P-2S-V2 Specifications

General

Brand	Interlogix
Model	NS3552-8P-2S-V2
Category	Switch
Language	English