Interlogix NS3552-8P-2S-V2 User Manual

Chapter 4: Web configuration
308 NS3552-8P-2S-V2 User Manual
PoE Powered Devices (PD)
3~5 Watts
Voice over IP phones
Enterprises can install POE VoIP phones, ATA, and other
Ethernet/non-Ethernet end-devices to the central location where
UPS is installed for uninterrupted power systems and power
control systems.
6~12 Watts
Wireless LAN Access Points
Museums, airports, hotels, campuses, factories, warehouses,
etc. can install APs in any location.
10~12 Watts
IP Surveillance
Enterprises, museums, campuses, hospitals, banks, etc. can
install IP cameras regardless of installation location without the
need to install AC sockets.
3~12 Watts
PoE Splitter
PoE splitters split the PoE 52 VDC over the Ethernet cable into a
5/12 VDC power output. It frees the device deployment from
restrictions due to power outlet locations, which eliminate the
costs for additional AC wiring and reduces the installation time.

Interlogix NS3552-8P-2S-V2 Specifications

General

Brand	Interlogix
Model	NS3552-8P-2S-V2
Category	Switch
Language	English