Interlogix NS3552-8P-2S-V2 User Manual

Chapter 6: Command line mode
NS3552-8P-2S-V2 User Manual 329
Parameters:
enable : Enable or renew DHCP client
disable: Disable DHCP client
Default Setting:
Disable
Example:
Disable DHCP sever:
NS3552
-8P-2S-V2:/>
ip dhcp disable
IP Setup
Description:
Set or show the IP setup.
Syntax:
IP Setup [<ip_addr>] [<ip_mask>] [<ip_router>] [<vid>]
Parameters:
<ip_addr> : IP address (a.b.c.d), default: Show IP address
<ip_mask> : IP subnet mask (a.b.c.d), default: Show IP mask
<ip_router>: IP router (a.b.c.d), default: Show IP router
<vid> : VLAN ID (1-4095), default: Show VLAN ID
Default Setting:
IP Address : 192.168.0.100
IP Mask : 255.255.255.0
IP Router : 192.168.0.1
DNS Server : 0.0.0.0
VLAN ID : 1
Example:
Set IP address:
NS3
552-8P-2S-V2:/>
ip setup 192.168.0.100 255.255.255.0
IP Ping
Description:
Ping IP address (ICMP echo).
Syntax:
IP Ping <ip_addr_string> [(Length <ping_length>)] [(Count <ping_count>)]
[(Interval <ping_interval>)]
Parameters:
<ip_addr_string>: IPv4 host address (a.b.c.d) or a host name string
length : PING Length keyword
<ping_length> : Ping ICMP data length (2-1452; Default is 56), excluding MAC,
IP and ICMP headers
count : PING Count keyword
<ping_count> : Transmit ECHO_REQUEST packet count (1-60; Default is 5)
interval : PING Interval keyword
<ping_interval> : Ping interval (0-30; Default is 0)

Interlogix NS3552-8P-2S-V2 Specifications

General

Brand	Interlogix
Model	NS3552-8P-2S-V2
Category	Switch
Language	English