Chapter 6: Command line mode
NS3552-8P-2S-V2 User Manual 331
Syntax:
IP IPv6 Setup [<ipv6_addr>] [<ipv6_prefix>] [<ipv6_router>]
Parameters:
<ipv6_addr>: IPv6 address is in 128-bit records represented as eight fields of up
to four hexadecimal digits with a colon separating each field (:). For
example, four hexadecimal digits with a colon separating each field (:).
For example, 'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special
syntax that can be used as a shorthand way of representing multiple
16-bit groups of contiguous zeros; but it can only appear once. It also
uses a following legally IPv4 address. For example,'::192.1.2.34'.
<ipv6_prefix>: IPv6 subnet mask , default: Show IPv6 prefix
<ipv6_router>: IPv6 router , default: Show IPv6 router. IPv6 address is in 128-bit
records represented as eight fields of up to four hexadecimal digits with
a colon separating each field (:). For example,
'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special syntax that can
be used as a shorthand way of representing multiple 16-bit groups of
contiguous zeros; but it can only appear once. It also uses a following
legally IPv4 address. For example,'::192.1.2.34'.
Default Setting:
IPv6 AUTOCONFIG mode : Disabled
IPv6 Link-Local Address: fe80::6082:cdb9:19ab:c0e2
IPv6 Address : ::192.168.0.100
IPv6 Prefix : 96
IPv6 Router : ::
Example:
Set IPv6 address:
-8P-2S-V2:/>ip ipv6 setup 2001::0002 64 2100::0001
IPv6 State
Description:
Set or show the IPv6 Interface operational state.
Syntax:
IP IPv6 State <ipv6_addr> [enable|disable]
Parameters:
<ipv6_addr>: IPv6 address is in 128-bit records represented as eight fields of up
to four hexadecimal digits with a colon separating each field (:). For
example, four hexadecimal digits with a colon separating each field (:).
For example, 'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special
syntax that can be used as a shorthand way of representing multiple
16-bit groups of contiguous zeros; but it can only appear once. It also
used a following legally IPv4 address. For example,'::192.1.2.34'.
enable : Enable the designated IPv6 Interface
disable: Disable the designated IPv6 Interface
IPv6 Ping6
Description:
Ping IPv6 address (ICMPv6 echo).
Syntax: