Interlogix NS3552-8P-2S-V2 - Page 347

Chapter 6: Command line mode
NS3552-8P-2S-V2 User Manual 345
<port_list> : Port list or 'all', default: All ports
Default Setting:
1
Example:
Add port1 to port4 in VLAN10
NS3552
-8P-2S-V2:/>vlan add 10 1-4
VLAN Forbidden Add
Description:
Add or modify VLAN entry in forbidden table.
Syntax:
VLAN Forbidden Add <vid>|<name> [<port_list>]
Parameters:
<vid>|<name>: VLAN ID (1-4095) or VLAN Name
<port_list> : Port list or 'all', default: All ports
Example:
Forbidden add port1 to port4 in VLAN10
NS3552
-8P-2S-V2:/>
vlan forbidden add 10 1-4
VLAN Delete
Description:
Delete VLAN entry.
Syntax:
VLAN Delete <vid>|<name>
Parameters:
<vid>|<name>: VLAN ID (1-4095) or VLAN Name
Example:
Delete VLAN10
NS3552
-8P-2S-V2:/>vlan delete 10
VLAN Forbidden Delete
Description:
Delete VLAN entry.
Syntax:
LAN Forbidden Delete <vid>|<name>
Parameters:
<vid>|<name>: VLAN ID (1-4095) or VLAN Name
Example:
Forbidden delete VLAN10
NS3552
-8P-2S-V2:/>
vlan forbidden delete 10
VLAN Forbidden Lookup
Description:
Lookup VLAN Forbidden port entry.