Interlogix NS3552-8P-2S-V2 - Page 349

Chapter 6: Command line mode
NS3552-8P-2S-V2 User Manual 347
VLAN Name Delete
Description:
Delete VLAN Name to VLAN ID Mapping.
Syntax:
VLAN Name Delete <name>
Parameters:
<name>: VLAN name - Maximum of 32 characters. VLAN Name can only
contain alphas or numbers. VLAN name should contain at least one alpha character.
Example:
Delete VLAN name
NS3552
-8P-2S-V2:/>vlan name delete test
VLAN Name Lookup
Description:
Show VLAN Name table.
Syntax:
VLAN Name Lookup [<name>]
Parameters:
<name>: VLAN name - Maximum of 32 characters. VLAN Name can only
contain alpha characters or numbers. VLAN name should contain at least one alpha
character.
Example:
To show VLAN Name table
NS3552
-8P-2S-V2:/>
vlan
name lookup
VLAN NAME vid
-------------------------------
---
test 1
VLAN Status
Description:
VLAN Port Configuration Status.
Syntax:
VLAN Status [<port_list>] [combined|static|nas|mvr|voice_vlan|mstp|all|conflicts]
Parameters:
<port_list>: Port list or 'all', default: All ports
combined : combined VLAN Users configuration
static : static port configuration
nas : NAS port configuration
mvr : MVR port configuration
voice_vlan : Voice VLAN port configuration
mstp : MSTP port configuration
all : All VLAN Users configuration
(default: combined VLAN Users configuration)
Default Setting:
Promiscous
Example: