Interlogix NS3552-8P-2S-V2 - Page 354

Chapter 6: Command line mode
352 NS3552-8P-2S-V2 User Manual
Default Setting:
15
Security Switch Auth Configuration
Description:
Show Auth configuration.
Syntax:
Security Switch Auth Configuration
Example:
Show authentication configuration.
NS3552
-8P-2S-V2:/>
security
switch auth configuration
Auth Configuration:
===================
Client Authentication Method Local Authentication Fallback
-------
---------------------- -----------------------------
console local Disabled
telnet local Disabled
ssh local Disabled
web local Disabled
Security Switch Auth Method
Description:
Set or show Auth method. (default: Show Auth method).
Syntax:
Security Switch Auth Method [console|telnet|ssh|web] [none|local|radius|tacacs+]
[enable|disable]
Parameters:
console : Settings for console
telnet : Settings for telnet
ssh : Settings for ssh
web : Settings for web
(default: Set or show the specific client authentication method)
none : Authentication disabled
local : Use local authentication
radius : Use remote RADIUS authentication
tacacs+ : Use remote TACACS+ authentication
(default: Show client authentication method)
enable : Enable local authentication if remote authentication fails
disable : Disable local authentication if remote authentication fails
(The parameter is effective when it is typed)
Default Setting:
disable
Example:
Use RADIUS authentication method for telnet.
NS3552
-8P-2S-V2:/>
security
switch auth method telnet radius enable