Interlogix NS3552-8P-2S-V2 - Page 356

Chapter 6: Command line mode
354 NS3552-8P-2S-V2 User Manual
Security Switch HTTPs Mode
Description:
Set or show the HTTPS mode.
Syntax:
Security Switch HTTPS Mode [enable|disable]
Parameters:
enable : Enable HTTPs
disable: Disable HTTPs
(default: Show HTTPs mode)
Default Setting:
Enable
Example:
Enable HTTPs function.
NS3552
-8P-2S-V2:/>
security
switch https mode enable
Security Switch HTTPs Redirect
Description:
Set or show the HTTPS redirect mode.
Automatic redirect web browser to HTTPS during HTTPS mode enabled.
Syntax:
Security Switch HTTPS Redirect [enable|disable]
Parameters:
enable : Enable HTTPs redirect
disable: Disable HTTPs redirect
(default: Show HTTPs redirect mode)
Default Setting:
disable
Example:
Enable HTTPs redirect function.
NS3552
-8P-2S-V2:/>security switch https redirect enable
Security Switch Access Configuration
Description:
Show access management configuration.
Syntax:
Security Switch Access Configuration
Example:
Show access management configuration.
NS3552
-8P-2S-V2:/>
security
switch access configuration
Access Mgmt Configuration:
========
==================
System Access Mode : Disabled
System Access number of entries: 0