Interlogix NS3552-8P-2S-V2 - Page 367

Chapter 6: Command line mode
NS3552-8P-2S-V2 User Manual 365
characters from 33 to 126
Example:
Add SNMPv3 user entry
NS3552
-8P-2S-V2:/>
security switch
snmp
user add 800007e5017f000003
admin_snmpv3 md5 12345678 des abcdefgh
Security Switch SNMP User Delete
Description:
Delete SNMPv3 user entry.
Syntax:
Security Switch SNMP User Delete <index>
Parameters:
<index>: entry index (1-64)
Example:
Delete SNMPv3 user entry
NS3552
-8P-2S-V2:/>
security switch
snmp
user delete 1
Security Switch SNMP User Changekey
Description:
Change SNMPv3 user password.
Syntax:
Security Switch SNMP User Changekey <engineid> <user_name>
<auth_password> [<priv_password>]
Parameters:
<engineid> : Engine ID, the format may not be all zeros or all 'ff'H and is
restricted to 5 - 32 octet string
<user_name> : A string identifying the user name that this entry should belong
to. The name of "None" is reserved. The allowed string length is (1-
32), and the allowed content is ASCII characters from 33 to 126
<auth_password>: A string identifying the authentication pass phrase
<priv_password>: A string identifying the privacy pass phrase.
The allowed string length is (8-40), and the allowed content is ASCII
characters from 33 to 126
Example:
Delete SNMPv3 user entry
NS3552
-8P-2S-V2:/>
security switch
snmp
user changekey
800007e5017f000003 admin_snmpv3 87654321 12345678
Security Switch SNMP User Lookup
Description:
Lookup SNMPv3 user entry.
Syntax:
Security Switch SNMP User Lookup [<index>]
Parameters:
<index>: entry index (1-64)
Example: