Interlogix NS3552-8P-2S-V2 - Page 391

Chapter 6: Command line mode
NS3552-8P-2S-V2 User Manual 389
trusted : Configures the port as trusted sources of the DHCP message
untrusted: Configures the port as untrusted sources of the DHCP message
(default: Show flow DHCP snooping port mode)
Default Setting:
trusted
Example:
Set untrusted DHCP snooping port mode in port 1
NS3552
-8P-2S-V2:/>
security
network dhcp snooping port mode 1
untrusted
Security Network DHCP Snooping Statistics
Description:
Show or clear DHCP snooping statistics.
Syntax:
Security Network DHCP Snooping Statistics [<port_list>] [clear]
Parameters:
<port_list>: Port list or 'all', default: All ports
clear : Clear DHCP snooping statistics
Example:
Show DHCP snooping statistics of port 1.
NS3552
-8P-2S-V2:/>
security
network dhcp snooping statistics 1
Port 1 Statistics:
--------------------
Rx Discover: 0 Tx Discover: 0
Rx Offer:
0 Tx Offer: 0
Rx Request: 0 Tx Request: 0
Rx Decline: 0 Tx Decline: 0
Rx ACK: 0 Tx ACK:
0
Rx NAK: 0 Tx NAK: 0
Rx Release: 0 Tx Release: 0
Rx Inform: 0 Tx Inform:
0
Rx Lease Query: 0 Tx Lease Query: 0
Rx Lease Unassigned: 0 Tx Lease Unassigned: 0
Rx Lease Unknown: 0 Tx Lease Unknown: 0
Rx Lease Active: 0 Tx Lease Active: 0
Security Network IP Source Guard Configuration
Description:
Show IP source guard configuration.
Syntax:
Security Network IP Source Guard Configuration
Security Network IP Source Guard Mode
Description:
Set or show IP source guard mode.
Syntax:
Security Network IP Source Guard Mode [enable|disable]