Interlogix NS3552-8P-2S-V2 User Manual

Chapter 6: Command line mode
404 NS3552-8P-2S-V2 User Manual
STP Port Statistic
Description:
Show STP port statistics.
Syntax:
STP Port Statistics [<port_list>] [clear]
Parameters:
<port_list>: Port list or 'all', default: All ports
clear : Clear the selected port statistics
Example:
Show STP port statistics.
NS3552
-8P-2S-V2:/>
stp port statistics
Port Rx MSTP Tx MSTP Rx RSTP Tx RSTP Rx STP Tx STP
Rx TCN Tx TCN Rx Ill. Rx Unk.
---------
-------- -------- -------- -------- ------- ------- ------- ------- ------- -----
--
STP Port Mcheck
Description:
Set the STP mCheck (Migration Check) variable for ports.
Syntax:
STP Port Mcheck [<port_list>]
Parameters:
<port_list>: Port list or 'all', default: All ports
Example:
Set the STP mCheck (Migration Check) variable for port 1.
NS3552
-8P-2S-V2:/>
stp port mcheck 1
STP MSTI Port Configuration
Description:
Show the STP port instance configuration.
Syntax:
STP Msti Port Configuration [<msti>] [<port_list>]
Parameters:
<msti> : STP bridge instance no (0-7, CIST=0, MSTI1=1, ...)
<port_list>: Port list or 'all', default: All ports
Default:
auto
STP MSTI Port Cost
Description:
Set or show the STP port instance path cost.
Syntax:
STP Msti Port Cost [<msti>] [<port_list>] [<path_cost>]
Parameters:
<msti> : STP bridge instance no (0-7, CIST=0, MSTI1=1, ...)
<port_list>: Port list or 'all'. Port zero means aggregations.

Interlogix NS3552-8P-2S-V2 Specifications

General

Brand	Interlogix
Model	NS3552-8P-2S-V2
Category	Switch
Language	English