Interlogix NS3552-8P-2S-V2 - Page 408

Chapter 6: Command line mode
406 NS3552-8P-2S-V2 User Manual
Aggregation Delete
Description:
Delete link aggregation.
Syntax:
Aggr Delete <aggr_id>
Parameters:
<aggr_id>: Aggregation ID
Example:
Delete Group2
NS3552
-8P-2S-V2:/>aggr delete 2
Aggregation Lookup
Description:
Lookup link aggregation.
Syntax:
Aggr Lookup [<aggr_id>]
Parameters:
<aggr_id>: Aggregation ID
Aggregation Mode
Description:
Set or show the link aggregation traffic distribution mode.
Syntax:
Aggr Mode [smac|dmac|ip|port] [enable|disable]
Parameters:
smac : Source MAC address
dmac : Destination MAC address
ip : Source and destination IP address
port : Source and destination UDP/TCP port
enable : Enable field in traffic distribution
disable: Disable field in traffic distribution
Default Setting:
SMAC : Enabled
DMAC : Disabled
IP : Enabled
Port : Enabled
Example:
Disable SMAC mode
NS3552
-8P-2S-V2:/>
Aggr mode smac disable