Interlogix NS3552-8P-2S-V2 User Manual

Chapter 6: Command line mode
NS3552-8P-2S-V2 User Manual 421
<port_list>: Port list or 'all', default: All ports
<dei_mode> : DEI mode: coloured|fixed
EVC Port Tag
Description:
Set or show port tag match mode.
Syntax:
EVC Port Tag [<port_list>] [<tag_mode>]
Parameters:
<port_list>: Port list or 'all', default: All ports
<tag_mode> : Tag mode: inner|outer
EVC Port Addr
Description:
Set or show port address match mode.
Syntax:
EVC Port Addr [<port_list>] [<addr_mode>]
Parameters:
<port_list>: Port list or 'all', default: All ports
<addr_mode>: IP/MAC address mode: source|destination
EVC Port L2CP
Description:
Set or show port L2CP mode
Syntax:
EVC Port L2CP [<port_list>] [<l2cp_list>] [<mode>]
Parameters:
<port_list>: Port list or 'all', default: All ports
<l2cp_list>: L2CP ID list (0-31). BPDU range: 0-15, GARP range: 16-31
<mode> : The mode takes the following values:
normal : Default forwarding
forward : Forward
redirect : Redirect to CPU
EVC Policer
Description:
Set or show EVC bandwidth profile.
Syntax:
EVC Policer [<policer_id>] [enable|disable] [<policer_mode>] [<cir>] [<cbs>] [<eir>]
[<ebs>]
Parameters:
<policer_id> : Policer ID (1-128)
enable : Enable policer
disable : Disable policer
<policer_mode>: Policer_mode: coupled|aware
<cir> : Committed Information Rate [kbps]
<cbs> : Committed Burst Size [bytes]

Interlogix NS3552-8P-2S-V2 Specifications

General

Brand	Interlogix
Model	NS3552-8P-2S-V2
Category	Switch
Language	English