Interlogix NS3552-8P-2S-V2 User Manual

Chapter 6: Command line mode
436 NS3552-8P-2S-V2 User Manual
Parameters:
<port_list>: Port list or 'all', default: All ports
<rate> : Rate in kbps or fps (100-15000000)
Default Setting:
500
Example:
Set the port policer rate in 1000
NS3552
-8P-2S-V2:/>
qos Port Policer Rate 1-10 1000
QoS Port Policer Unit
Description:
Set or show the port policer unit.
Syntax:
QoS Port Policer Unit [<port_list>] [kbps|fps]
Parameters:
<port_list>: Port list or 'all', default: All ports
kbps : Unit is kilo bits per second
fps : Unit is frames per second
(default: Show port policer unit)
Default Setting:
kbps
Example:
Set the port policer unit in fps
NS3552
-8P-2S-V2:/>
qos Port Policer unit 1-10 fps
QoS Port Policer Flow Control
Description:
Set or show the port policer flow control.
If policer flow control is enabled and the port is in flow control mode, then pause
frames are sent instead of discarding frames.
Syntax:
QoS Port Policer FlowControl [<port_list>] [enable|disable]
Parameters:
<port_list>: Port list or 'all', default: All ports
enable : Enable port policer flow control
disable : Disable port policer flow control
(default: Show port policer flow control mode)
Default Setting:
disable
QoS Port QueuePolicer Mode
Description:
Set or show the port queue policer mode.
Syntax:
QoS Port QueuePolicer Mode [<port_list>] [<queue_list>] [enable|disable]
Parameters:

Interlogix NS3552-8P-2S-V2 Specifications

General

Brand	Interlogix
Model	NS3552-8P-2S-V2
Category	Switch
Language	English