Interlogix NS3552-8P-2S-V2 User Manual

Chapter 6: Command line mode
NS3552-8P-2S-V2 User Manual 439
NS3552
-8P-2S-V2:/>
qos Port QueueShaper Excess 1-10 0-7 enable
QoS Port TagRemarking Mode
Description:
Set or show the port tag remarking mode.
Syntax:
QoS Port TagRemarking Mode [<port_list>] [classified|default|mapped]
Parameters:
<port_list>: Port list or 'all', default: All ports
classified: Use classified PCP/DEI values
default : Use default PCP/DEI values
mapped : Use mapped versions of QoS class and DP level
(default: Show port tag remarking mode)
Default Setting:
classified
Example:
Set the port tag remarking mode in mapped.
NS3552
-8P-2S-V2:/>
qos Port TagRemarking Mode 1-10 mapped
QoS Port TagRemarking PCP
Description:
Set or show the default PCP. This value is used when port tag remarking mode is
set to 'default'.
Syntax:
QoS Port TagRemarking PCP [<port_list>] [<pcp>]
Parameters:
<port_list>: Port list or 'all', default: All ports
<pcp> : Priority Code Point (0-7)
Default Setting:
0
Example:
Set the default PCP in 1.
NS3552
-8P-2S-V2:/>
qos Port TagRemarking PCP 1-10 1
QoS Port TagRemarking DEI
Description:
Set or show the default DEI. This value is used when port tag remarking mode is
set to 'default'.
Syntax:
QoS Port TagRemarking DEI [<port_list>] [<dei>]
Parameters:
<port_list>: Port list or 'all', default: All ports
<dei> : Drop Eligible Indicator (0-1)
Default Setting:
0

Interlogix NS3552-8P-2S-V2 Specifications

General

Brand	Interlogix
Model	NS3552-8P-2S-V2
Category	Switch
Language	English