Interlogix NS3552-8P-2S-V2 User Manual

Chapter 6: Command line mode
NS3552-8P-2S-V2 User Manual 449
UPnP Configuration:
===================
UPnP Mode : Disabled
UPnP TTL : 4
UPnP Advertising Duration : 100
UPnP Mode
Description:
Set or show the UPnP mode.
Syntax:
UPnP Mode [enable|disable]
Parameters:
enable : Enable UPnP
disable: Disable UPnP
(default: Show UPnP mode)
Default Setting:
disable
Example:
Enable the UPnP mode.
NS3552
-8P-2S-V2:/>
upnp
mode enable
UPnP TTL
Description:
Set or show the TTL value of the IP header in SSDP messages.
Syntax:
UPnP TTL [<ttl>]
Parameters:
<ttl>: ttl range (1..255), default: Show UPnP TTL
Default Setting:
4
Example:
Set the value 10 for TTL value of the IP header in SSDP messages.
NS3552
-8P-2S-V2:/>
upnp
ttl 10
UPnP Advertising Duration
Description:
Set or show UPnP Advertising Duration.
Syntax:
UPnP Advertising Duration [<duration>]
Parameters:
<duration>: duration range (100..86400), default: Show UPnP duration range
Default Setting:
100

Interlogix NS3552-8P-2S-V2 Specifications

General

Brand	Interlogix
Model	NS3552-8P-2S-V2
Category	Switch
Language	English