Interlogix NS3552-8P-2S-V2 - Page 453

Chapter 6: Command line mode
NS3552-8P-2S-V2 User Manual 451
Example:
Enable MVR mode.
NS3552
-8P-2S-V2:/>
mvr mode enable
MVR VLAN Setup
Description:
Set or show per MVR VLAN configuration.
Syntax:
MVR VLAN Setup [<mvid>] [add|del|upd] [(Name <mvr_name>)]
Parameters:
<mvid> : MVR VLAN ID (1-4095)
add : Add operation
del : Delete operation
upd : Update operation
name : MVR Name keyword
<mvr_name>: MVR VLAN name (Maximum of 32 characters)
MVR VLAN Mode
Description:
Set or show per MVR VLAN mode.
Syntax:
MVR VLAN Mode [<vid>|<mvr_name>] [dynamic|compatible]
Parameters:
<vid>|<mvr_name>: MVR VLAN ID (1-4095) or Name (Maximum of 32
characters)
dynamic : Dynamic MVR mode
compatible: Compatible MVR mode
(default: Show MVR VLAN mode)
MVR VLAN Port
Description:
Set or show per MVR VLAN port role.
Syntax:
MVR VLAN Port [<vid>|<mvr_name>] [<port_list>] [source|receiver|inactive]
Parameters:
<vid>|<mvr_name>: MVR VLAN ID (1-4095) or Name (Maximum of 32
characters)
<port_list> : Port list or 'all', default: All ports
source : MVR source port
receiver : MVR receiver port
inactive : Disable MVR
(default: Show MVR port role)
MVR VLAN LLQI
Description:
Set or show per MVR VLAN LLQI (Last Listener Query Interval).