Interlogix NS3552-8P-2S-V2 User Manual

Chapter 8: Troubleshooting
490 NS3552-8P-2S-V2 User Manual
Can I install a MGB-SX or other non-wide temperature SFP module into the SFP
slot of the industrial managed switch?
Yes. However, the MGB-SX and other non-wide temperature SFP modules cannot
operate under the wide temperature range of -40 to 75°C. We recommend using an IFS
wide temperature SFP module for the industrial managed switch.
If an IP address needs to be changed or an admin password is forgotten:
To reset the IP address to the default IP address “192.168.0.100” or reset the password
to default value, press the hardware reset button at the front panel for approximately 10
seconds. After the device is rebooted, you can log in to the management web interface
within the same subnet of 192.168.0.xx.

Interlogix NS3552-8P-2S-V2 Specifications

General

Brand	Interlogix
Model	NS3552-8P-2S-V2
Category	Switch
Language	English