Interlogix NS3552-8P-2S-V2 User Manual

Chapter 4: Web configuration
52 NS3552-8P-2S-V2 User Manual
Object Description
Disable to disable the Daylight Saving Time configuration. Select Recurring
and configure the Daylight Saving Time duration to repeat the configuration
every year. Select Non-Recurring and configure the Daylight Saving Time
duration for single time configuration. (Default: Disabled).
Start Time Settings Week - Select the starting week number.
Day - Select the starting day.
Month - Select the starting month.
Hours - Select the starting hour.
Minutes - Select the starting minute.
End Time Settings Week - Select the ending week number.
Day - Select the ending day.
Month - Select the ending month.
Hours - Select the ending hour.
Minutes - Select the ending minute
Offset Settings Enter the number of minutes (1 to 1440) to add during Daylight Saving Time.
Buttons
• Click Save to apply changes.
• Click Reset to undo any changes made locally and revert to previously saved
values.
UPnP
UPnP is an acronym for Universal Plug and Play. The goals of UPnP are to allow
devices to connect seamlessly and to simplify the implementation of networks in home
(data sharing, communications, and entertainment) and corporate environments for
easy installation of computer components. Configure UPnP on the UPnP Configuration
page.
This page includes the following fields:
Object Description
Mode Indicates the UPnP operation mode. Possible modes are:
Enabled: Enable UPnP mode operation.
Disabled: Disable UPnP mode operation.
When the mode is enabled, two ACEs are added automatically to trap UPnP

Interlogix NS3552-8P-2S-V2 Specifications

General

Brand	Interlogix
Model	NS3552-8P-2S-V2
Category	Switch
Language	English