Chapter 4: Web configuration
70 NS3552-8P-2S-V2 User Manual
The page includes the following fields:
Object Description
Delete Permits deletion of pool settings.
Name Configure the pool name that accepts all printable characters, except
white space. If you want to configure the detail settings, click the pool
name to go into the configuration page.
Type Indicates the pool type.
Network: The pool defines a pool of IP addresses to service more
than one DHCP client.
Host: the pool services for a specific DHCP client identified by client
identifier or hardware address.
If "-" appears, it means not defined.
IP Indicates the network number of the DHCP address pool.
If "-" appears, it means not defined.
Subnet Mask Indicates the subnet mask of the DHCP address pool.
If "-" appears, it means not defined.
Lease Time Indicates the lease time of the pool.
Buttons
• Click Add New Pool to add a new DHCP pool.
• Click Apply to apply changes.
• Click Reset to undo any changes made locally and revert to previously saved
values.
Click a pool name to configure DHCP pool settings on the DHCP Pool Configuration
page.
To Next Page
Loading...
