Chapter 4: Web configuration
NS3552-8P-2S-V2 User Manual 83
SNMPv3 Views Configure SNMPv3 views table on this page.
SNMPv3 Access Configure SNMPv3 accesses table on this page.
SNMP system and trap configuration
Configure SNMP on the SNMP System Configuration page.
The page includes the following fields:
Object Description
Mode Indicates the SNMP mode operation. Selections include:
Enabled: Enable SNMP mode operation.
Disabled: Disable SNMP mode operation.
Version Indicates the SNMP supported version. Selections include:
SNMP v1: Set SNMP trap supported version 1.
SNMP v2c: Set SNMP trap supported version 2c.
SNMP v3: Set SNMP trap supported version 3.
Read Community Indicates the community read access string to permit access to the
SNMP agent. The allowed string length is 0 to 255, and the allowed
content is the ASCII characters from 33 to 126.
The field is applicable only when the SNMP version is SNMPv1 or
To Next Page
Loading...
