Chapter 4: Web configuration
90 NS3552-8P-2S-V2 User Manual
Buttons
• Click Add New Entry to add a new view entry.
• Click Save to save changes.
• Click Reset to undo any changes made locally and revert to previously saved
values.
SNMPv3 access
Configure SNMPv3 access on the SNMPv3 Access Configuration page. The entry
index keys are Group Name, Security Model, and Security Level.
The page includes the following fields:
Object Description
Delete Select Delete to delete the entry. It will be deleted during the next
save.
Group Name A string identifies the group name that this entry should belong to.
The allowed string length is 1 to 32, and the allowed content is the
ASCII characters from 33 to 126.
Security Model Indicates the security model that this entry should belong to.
Selections include:
any: Accepted any security model (v1, v2c, usm).
v1: Reserved for SNMPv1.
v2c: Reserved for SNMPv2c.
usm: User-based Security Model (USM)
Security Level Indicates the security model that this entry should belong to.
Selections include:
NoAuth, NoPriv: None authentication and none privacy.
Auth, NoPriv: Authentication and none privacy.
Auth, Priv: Authentication and privacy.
Read View Name The name of the MIB view defining the MIB objects for which this
request may request the current values. The allowed string length is 1
to 32, and the allowed content is the ASCII characters from 33 to 126.
Write View Name The name of the MIB view defining the MIB objects for which this
request may potentially SET new values. The allowed string length is
1 to 32, and the allowed content is the ASCII characters from 33 to
126.
To Next Page
Loading...
Need help?
General
