68 Installation Guide
Note:
The default IP address of the camera is 192.168.1.70.
For the camera to enable DHCP by default, you must
activate the camera via TruVision Device Manager.
Please refer to the following section, “Activation via
TruVision Device Manager”.
3. Enter the password in the password field.
Note: A valid password range must be between 8 and 16
characters. You can use a combination of numbers, lower
and upper case letters, and special characters : _ - , . * &
@ / $ ? Space. The password must contain characters
from at least two of these groups. We also recommend
that you reset your password regularly. For high security
systems, it is particularly recommended to reset the
password monthly or weekly for better protection.
4. Confirm the password.
5. Click OK to save the password and enter the live view.
To Next Page
Loading...
Need help?
General
