Interlogix xGenConnect NXG-4 - Page 168

156 xGenConnect Installation and Programming Guide
Appendix 3: NetworX Modules Compatibility
Module part
number
Description
Supported by
xGenConnect
Remarks
NX-7002N-V3
Plug on GSM module for NX-V3
control panels
No
Use NXG-7002
NX-535N
Voice speech module
No
NX-535N-V3
Plug on Voice speech module for
NX-V3 control panels
No
NX-1048-R-D-EN
Multilingual LCD keypad,
wireless 868 MHz GEN2, white,
incl. batteries
No
NX-1048-D-EN
Multilingual LCD keypad, wired,
white
Yes
No programming, limited
user functions
NX-848E
Transceiver in housing for
mounting out of the box
Yes
Use NXG-868 for new
installations
Requires NX keypad for
programming
60-904-43-48Z
48 zone wireless receiver,
433.92 MHz (NX-448E)
Yes
Use NXG-433 or NXG-
9-RF-LB for new
installations
NX-1xx
8 zone LED keypad without door
Yes
No programming, limited
user functions
NX-13xx
16 zone LED design keypad with
removable door
Yes
No programming, limited
user functions
NX-15xx
16 zone LED vertical keypad with
removable door
Yes
No programming, limited
user functions
NX-1820E-EUR
Touch screen keypad, multi-
lingual
No
Use NXG-1820-EUR or
NXG-183x-EUR
NX-148
LCD design keypad with
removable door
Yes
No programming, limited
user functions
NX-587E
Virtual keypad
No
NX-216E-EN
16 zone expander module for
NX-8 and NX-8E, EN approved
Yes
NX-508E
Output module with 8 open
collectors
Yes
Requires NX keypad for
programming
NX-507E
Output module with 7 relays and
1 OC
Yes
Requires NX keypad for
programming
NX-534E-AL
Two-way voice module, including
3510
No
NX-540E
Telephone interface module
No
NX-320-I
Smart power supply and bus
extender
Yes
Use NXG-320 for new
installations
Requires NX keypad for
programming
NX-584E
Home automation module with
two-way serial port interface
No