ZeroWire Installation Manual  103 
System Status Messages 
Various messages may appear on the Status screen of ZeroWire Web Server and 
UltraSync + app. These are also announced by voice when the Status button is pressed. 
System 
•  AC power fail – The security system has lost its electricity power. May take up to 5 min to clear 
once power restored. 
•  Low battery – The security system’s back up battery requires charging. May take up to 5 min to 
clear once battery charged. 
•  Battery test fail – The security system’s back up battery requires changing. If after 48 hours this 
message does not clear, contact your service provider to order a new battery.
 If the power fails, 
your system will not be operational. 
•  Box tamper – The security system’s cabinet tamper input has activated  
•  Siren trouble – The security system’s external siren has a problem 
•  Over current – The security system is drawing too much current 
•  Time and date loss The security system time and date need resetting 
•  Communication fault – The security system has detected a problem with the communication 
path (LAN or GSM interface) 
•  Monitoring Link Fault 1 – The link between the LAN interface to the alarm reporting server ARC 
is interrupted 
•  Monitoring Link Fault 2 – The link between the GSM interface to the alarm reporting server ARC 
is interrupted 
•  Fire alarm – A fire alarm has been activated from the ZeroWire unit 
•  Panic – A panic alarm has been activated from the ZeroWire unit 
•  Medical – A medical alarm has been activated from the ZeroWire unit 
Area Number. Area Name 
•  Is On in the away mode – This area is armed in the away mode 
•  Is On in the stay mode – This area is armed in the stay mode 
•  Is ready – This area is secure and ready to be armed 
•  Is not ready – This area is NOT ready to be armed, a zone is not secure 
•  All areas are on in the away mode – All areas in this multi area system are armed in the away 
mode 
•  All areas are on in the stay mode – All areas in this multi area system are armed in the stay 
mode 
•  All areas are ready – All areas in this multi area system are secure and ready to be armed