ZeroWire Installation Manual 39
Enabling Access to UltraSync + app
For security, the UltraSync + app is disabled by default. Follow these steps to enable it:
1.
Select main menu - Option 9, Advanced system
configuration
2.
Enter your Installer code
3.
Change Web Access Passcode
4.
Enter a new Web Access Passcode
5.
( ( CODE FLASHES ON KEYPAD ) )
Passcode will flash on keypad for confirmation
6.
Exits from Advanced system configuration menu
Alternatively, you may use the Web Server:
1. Log in to the ZeroWire Web Server from your mobile device using the installer account.
2. Click Settings.
3. Click Network.
4. Enter a Web Access Passcode:
To Next Page
Loading...
