58
Learning Zones into ZeroWire
1. Connect to the ZeroWire Web Server (either via WiFi Discovery Mode, WiFi LAN,
Ethernet LAN, or the UltraSync + app).
2. Enter your username and password, by default this is “installer” and “9713”, then click
Sign In.
3. You should now see a screen similar to the one shown below.
This screen displays colour coded system status messages:
• Red – critical messages including alarm
• Yellow – zones bypassed
• Blue – system (fault) conditions present
• Green – system is normal
4. Click Settings.
5. Click Zones.
To Next Page
Loading...
