70
Testing Your System
System Tests
Your security system is only as effective as each of the components. This includes your
sirens, communicator, back up battery, and detection devices.
Each of these should be tested at least once per week and maintained to provide the
highest level of security. Failure to conduct regular testing can result in system failure
when most required.
The four system tests to perform are:
Performing a Walk Test
This is an important test to use regularly to verify that each detector is working correctly.
Example: How to perform a zone walk test
1.
Select main menu - Option 4, System Test
2.
Enter your Installer code.
3.
Select zone walk test
4.
Walk past each motion detector, open and close
windows and doors with sensors
The ZeroWire will pulse the siren and announce the
zone name and the signal level of each sensor that is
triggered.
5.
Hear the status of each zone that has been tested.
6.
Exits from System Test
Note: Walk Test is also available from the Web Page and UltraSync + app:
YOUR 4 TO 8 DIGIT INSTALLER CODE
To Next Page
Loading...
