Interlogix ZEROWIRE ZW-6404 - Recording User Names; Removing a User; Adding a Keyfob

ZeroWire Installation Manual 55
Recording User Names (optional)
You can also record the names of the first 40 users using your voice.
Example: Record user name 1
1.
Select main menu - Option 6, Voice message
recording.
2.
Enter your Master code.
3.
Select user name recording.
4.
Select user 1.
5.
Activate recording mode.
6.
Record voice, maximum 2 seconds.
7.
Stop recording mode.
8.
Exit from the menu.
Removing a User
Example: Remove user 4 from your system
1.
Select User Configuration menu.
2.
Enter your Master code.
3.
Select 1 to configure user PIN.
4.
Select user 4.
5.
Press Bypass to disable the selected user's PIN code.
6.
Exit from the menu.
Adding a Keyfob
Example: Add a new keyfob and assign it as user 65
1.
Select Zone Configuration.
2.
Enter your Master code.
3.
Select 1 to add a keyfob.
4.
Activate the keyfob learn-in sequence (see specific
wireless keyfob manual for instructions).
ZeroWire will announce that the keyfob is detected.
PRESS DEVICE BUTTON
1
ENTER
YOUR 4 TO 8 DIGIT MASTER CODE
5
MENU
MENU
MENU
MENU
BYPASS
ENTER
4
1
ENTER
YOUR 4 TO 8 DIGIT MASTER CODE
3
MENU
MENU
MENU
MENU
RELEASE HISTORY
( ( SPEAK NAME ) )
HOLD DOWN HISTORY
ENTER
1
3
ENTER
YOUR 4 TO 8 DIGIT MASTER CODE
6
MENU