Interlogix ZEROWIRE ZW-6404 - Changing the User Type

54
Changing the User Type (optional)
The user type determines what that user can do:
• Master users can arm and disarm areas. They can create, delete, or modify user
codes. They can also change system settings.
• Standard users can arm and disarm areas. But they cannot create users or review
event history.
• Arm only users can only turn on the security system, they cannot disarm, or dismiss
any system conditions.
Example: Change user 6 to a master user and allow to add/remove other users.
1.
Select User Configuration menu.
2.
Enter your MASTER code.
3.
Select 2 to configure user type.
4.
Select the user number.
5.
Select 2 for the installer user type (available options:
1−Standard, 2−Master, 3−Arm Only.).
6.
Exit from the menu.
MENU
MENU
MENU
2
ENTER
6
2
ENTER
YOUR 4 TO 8 DIGIT MASTER CODE
3
MENU