ZeroWire Installation Manual 23
Back View
4. Connect the internal antenna cable from the ZeroWire to the radio module.
5. Connect a high gain antenna to the antenna connector shown below.
6. Reconnect power and wait 1 minute for the cellular radio to connect.
7. Retest signal level in Menu 4 – 5.
8. Move the ZeroWire or the antenna to another location if the signal is still too low.
Completing Installation
1. Insert the whole radio module in to the ZeroWire taking care not to crimp any cables.
2. Replace the modem cover on the ZeroWire
To Next Page
Loading...
