30
15. Your ZeroWire is now successfully connected to your WiFi network:
Troubleshooting
If the connection does not work or you cannot get an IP address, close the web browser
on your phone, and restart your wireless router, and start again from step 1.
Sometimes settings on your wireless router may prevent a connection. Check:
• WiFi router allows b and g connections. Some newer routers will have these off at
factory default. Some 802.11n access points may not accept 802.11g connections.
• it is within range and has good signal, otherwise a WiFi range extender may help
• the wireless router has DHCP enabled
• does not have firewall or security rules that prevent additional connections
• IP addresses are available, for example connect a new device to it and verify it has an
internet connection
To Next Page
Loading...
