ZeroWire Installation Manual 33
Note: The set of accessible menus depends on the access rights of the user logged in the
system. The screen above shows default installer menus, but they can be different for a
Master User, standard user, and an installer with Master User rights. For more information,
see "Access rights and available menus" on page 37. The same applies to a connection
via the UltraSync + app.
9. Your ZeroWire is now successfully connected to your Wired LAN network.
Click Settings or Advanced to program your ZeroWire.
Check LAN Connection to UltraSync
1. Log in to the ZeroWire Web Server from your mobile device using the IP address
announced.
2. Click Settings.
3. Select Connection Status in the drop down menu.
4. Check that:
a. LAN Status should display “Connected”,
b. LAN Media should display “Ethernet”,
c. UltraSync Status should display “Connected”,
d. UltraSync Media should display “LAN”.
To Next Page
Loading...
