Interlogix ZEROWIRE ZW-6404 - Relinquish Primary Control

ZeroWire Installation Manual 85
5. ZeroWire now displays “Alarm is Primary Controller” to indicate successful shift:
6. ZeroWire will now be the Primary Z-Wave Controller, and the other network is the
Secondary Z-Wave Controller.
Relinquish Primary Control of ZeroWire to another Controller
1. Log in to ZeroWire Web Server or UltraSync + app.
2. Click Settings, Z-Wave Add/Remove.
3. Check ZeroWire is the primary controller and a secondary controller is already learnt in
to ZeroWire. ZeroWire in Primary Controller mode has Add Remove Cancel Shift and
Include buttons.