83
EN
Selecting the operating mode
Fig. 18: Operating mode
Use the function keys on the left to select the operating mode for the device.
Possible settings
Permanently ON (FIX) Channel is permanently switched on.
Permanently OFF (FIX) Channel is permanently switched off.
Override mode ON (OVR) In override mode, the current programme is temporarily
overwritten.
• Start a programme early that is set to start later with
“Override mode ON”.
The override function only applies to the current programme
and remains active until the next automatic command. Then
the device returns to automatic mode.
Example:
A daily programme switches the device on every day from 8:00
a.m. to 5:00 p.m. If, however, you want the device to already
be on at 6:00 a.m. one day, use the override mode.
1 6 12 18 24
Menu
09:00
13.03.2016
51
1 2
CH 1 OvrFix
OVRFIX
To Next Page
Loading...
Need help?
General
