Intermatic Grasslin talento smart B15 - Overview; Design and Function

60
EN
Overview
Design and function
Fig. 1: DIN-rail timer
A 110 – 230V 1 or 2-channel DIN-rail timer
B 12/24V DIN-rail timer
1
Click system for installation on a DIN rail
2
Terminals for channel 2 (only for 2-channel variant)
3
Terminal for phase
4
Sealable housing
5
Display
6
Control buttons
7
Terminal for neutral conductor
8
Terminals for channel 1
9
Potential-free empty terminal
Description of function
The DIN-rail timer is a timer that is installed on a DIN rail (Fig.1/
1
) by means of a click system; the timer
activates the connected device. The DIN-rail timer has one or two channels and can be operated via a dis-
play (Fig.1/
5
) with four control buttons (Fig.1/
6
). The DIN-rail timer can be programmed manually or via
a mobile device. The radio signal frequency is 2.4GHz and the maximum transmission power is 1.8mW.
1 1
2 23 3 74 4
5 5
6 6
7 98 8
A B