Intermatic Grasslin talento smart B15 User Manual

105
EN
PROGRAMMING RANDOM SWITCHING
Random switching is only possible for certain variants.
Fig. 35: Programming random switching
Random programming is only possible in advanced mode (Ä Chapter „Selecting the mode“ on
page82).
Example
Channel1 is switched on at random at 6:30 a.m. with an offset of ± 30 minutes, Monday to Friday.
1. Press the
Menu button.
2. Select
Program and conrm with OK.
3. Select
New and conrm with OK.
ð The number of available programme memory slots is displayed briey (PXXX).
The number of available switching programme memory slots is displayed briey (dXXX).
4. In menu item
With Date?, specify whether the switching programme is to be programmed with a
date (Ä Chapter „Date-dependent/date-independent programming“ on page93).
5. Select the
Random ON or Random OFF function and conrm with OK.
You can dene an offset of up to ±2hours.
Days
12345--
Mon – Fri
OK
Program
Menu
OK
New
OK
With Date?
Yes/No
OK
Time
06:00
Hours
OK
Time
06:30
Minutes
OK
Offset
00:00
Hours
OK
Offset
00:30
Minutes
OK
Channels
––
CH1
OK
Add
switching time?
Yes/No
OK
Priority
Very low…
OK
Select FNC
Random ON/OFF
OK

Intermatic Grasslin talento smart B15 Specifications

General

Brand	Intermatic
Model	Grasslin talento smart B15
Category	Timer
Language	English