Intermatic Grasslin talento smart B15 User Manual

101
EN
1. Press the Menu button.
2. Select
Program and conrm with OK.
3. Select
New and conrm with OK.
ð The number of available programme memory slots is displayed briey (PXXX).
The number of available switching programme memory slots is displayed briey (dXXX).
4. In menu item
With Date?, specify whether the switching programme is to be programmed with a
date (Ä Chapter „Date-dependent/date-independent programming“ on page93).
5. Select the
Pulse function and conrm with OK.
6. Enter the hours and minutes for the switching time (+/-) and conrm with
OK.
7. Enter hour(s), minute(s) and second(s) of the pulse duration (+/-) and conrm with
OK.
8. Set the day(s) of the week (⋀/⋁) on which the switching time should apply, and conrm with
OK.
The days of the week 1 – 5, 6 – 7 and 1 – 7 are set by default. Individual days of the week
can be set (+/-) under menu item “Select days”.
9. Select the channel (+/-) for which the pulse is to be set, and conrm with
OK.
The channel selection is only displayed if there are two or more channels.
+ Active channel
– Inactive channel
10. To create a new switching time, select YES and conrm with OK.
11. Adopt the automatically suggested priority and conrm with
OK or adjust the priority.
You can only select a priority in advanced mode (Ä Chapter „Prioritising programmes“ on
page95).

Intermatic Grasslin talento smart B15 Specifications

General

Brand	Intermatic
Model	Grasslin talento smart B15
Category	Timer
Language	English