Intermec CK61 - Imager Settings; Enabling Bluetooth; Creating an SF51 Connection Label

Chapter 3 — Configuring the Computer
CK61 Mobile Computer with Windows Mobile User’s Manual 97
Imager Settings
Depending on what is selected as the scanner model, image settings, decode
security, scanner settings, and virtual wedge are configured from the
Intermec Settings applet. See the Intermec Computer Command Reference
Manual for more information.
Enabling Bluetooth
Bluetooth is required for the SF51. On the CK61, use the Bluetooth applet
to enable Bluetooth communications before you configure the SF51.
To enable Bluetooth
Creating an SF51 Connection Label
To initiate a connection from the SF51, use EasySet to create an SF51
connection label with the CK61 Bluetooth address. The device address is
listed in the Bluetooth applet via the Devices tab on your CK61, like the
following example:
1 Select Start > Settings > the Connections tab > the Bluetooth icon.
2 Check Turn on Bluetooth.
3 Click ok to apply this change.